DC 5V-24V Automation Delay Multifunction Self-lock Relay Cycle Timer Module

Description: DC 5V-24V Automation Delay Multifunction Self-lock Relay Cycle Timer ModuleProduct Image: Product Description: The TRM01 delay relay module adopts high-quality components and is carefully designed and processed. It has stable performance and simple operation. It can be widely used in various control situations that require delay and self-locking. The module is preset with 4 functions to meet a variety of application requirements, and other specific functions can be customized and added according to user needs. Features: 1. With delay pull-in, delay disconnection, self-locking and trigger delay functions; 2. Equipped with the function of anti-reverse power connection, the module will not be damaged if the power is connected reversely; 3. There are three working voltage versions of 5V/12V/24V for users to choose; 4. Timing duration can be set arbitrarily between 0.1 second and 120 seconds; 5. The parameters can be saved, and the setting content will not be lost after power off. A module function The user can select one of the following 4 functions by pressing the button, and the delay time can be selected by adjusting the potentiometer. The delay time T1 can be adjusted between 0.1 second and 120 seconds. Function F1: Power-on delayed pull-in: After a delay of T1 time from power-on, the relay pulls in, and a high-level pulse signal is given to the X1 interface at any time, this function resets and restarts operation; Function F2: Power-on delay disconnection: When power-on, the relay is closed, and after T1 is closed, the relay is disconnected, and a high-level pulse signal is given to the X1 interface at any time. This function resets and restarts operation; Function F3: Self-locking relay mode: Give a high-level pulse signal to the X1 interface of the relay, the relay is closed, and then a high-level pulse signal is turned off. Function F4: Level trigger mode: When the power is turned on, the relay is disconnected. Give a high level signal to the X1 interface. The relay will be closed immediately. After the X1 port signal disappears, the relay will still be closed. When the pull-in time T1 reaches, the relay will be disconnected. Two electrical parameters Working voltage: DC 5V, 12V, 24V three options (should not exceed +/-10% of the nominal voltage) Working current: less than 80mA at 5V (less than 1mA when the relay is not operating) Less than 35mA at 12V (less than 1mA when the relay is not operating) Less than 18mA at 24V (less than 1mA when the relay is not operating) Working temperature: recommended -20℃—60℃ (limit range -30℃—70℃) Load capacity: the maximum load capacity of the relay normally open port: DC 0-30V/10A, AC 0-250V/10A Maximum load capacity of relay normally closed port: DC 0-28V/10A, AC 0-125V/10A Three module interface Module voltage/signal input terminal: there is a 3-wire interface, all interfaces have wiring terminals, which is convenient for users to use 1. DC+: DC power supply positive 2. DC-: negative pole of DC power supply 3. X1: Input signal detection interface Relay load output terminal: there is a 3-wire interface, all interfaces have wiring terminals 1. COM: relay common interface 2. NO: The relay normally open interface, the relay is suspended before the pull-in, and short-connected to the COM after the pull-in 3. NC: The relay normally closed interface, the relay is short-connected with COM before it is closed, and it is suspended after it is closed Four module size Dimensions: 60mm*35mm*20mm (length * width * height). FeedbackWarrantyShipmentFeedbackWe appreciate your feedback very much. As it will motivate us do better. If you have any questions with our goods or service, Please kindly contact us firstly before leaving negative feedback. Thank you in advance Warranty1. All merchandise will be carefully test before shipping. We will try our best to avoid any quality problem. 2. We promise warranty for quality in one year and we will repair it free of charge. The returning shipping should be paid by customer. 3. If you are not satisfied with the product, Please contact us. We'll provide you a satisfying solution.Shipment1.Normmly we will send the goods within 1-3 working days after your payment is verified . 2.Please check if the goods are in good condition and sign before the delivery man leaves.If you find the product is lost or damaged on the way. Please take photo and let the delivery men confirm it. Then we will help you let the shipping company compensate you.On Mar-14-21 at 23:51:04 PDT, seller added the following information:

Price: 3.87 USD

Location: 深圳, 廣東省

End Time: 2023-12-15T07:45:10.000Z

Shipping Cost: 3 USD