Aqua Products Sol Above ground or In-Ground Robotic Swimming Pool Cleaners

Description: Aqua Products™ Sol™ Robotic Automatic Swimming Pool Cleaners (Choose Above ground or In-Ground) Features of the Sol™ Above Ground Model - Why work cleaning your above-ground pool when you can work on something better, like your tan lines! The Aqua Products Sol™Robotic Above-Ground Pool Cleaner goes a step above to clean below so you can kick back and enjoy the sun. With Sol™Above-ground, you don’t need to worry about dirt and debris mucking up your pool. So long as Sol Above-ground is on duty, leaves and dirt don’t dare stay. While Sol™ Above-ground may be small, its super cyclonic vacuum action and mighty scrubbing brush get the job done. So relax, and apply your sunscreen while this compact cleaner kicks debris to the curb! Features: Cleans above-ground pools up to 30 feet round 40-foot cable included Does the dirty work – cleans and brushes your above-ground pool floor and cove in just 2 hours Slime Scrubber – Scrubbing brush rids your pool floor of any slippery slime EZ-Clean debris basket – Once cleaning is done simply, pull, spray, and shake the debris away! Good things come in small packages – Lightweight and easy to carry Powerful vacuum suction - Keeps dirt and debris spiraling in the basket instead of settling and slowing suction. Easy Operation - just plug n' play with a single push of a buttonManufacturer Warranty- 2-year limited warranty Specifications: Pool Type - Above-ground pools & flat bottom in-ground pools with slope <15 degrees Pool Surface - Vinyl liners only Cleaning Coverage Mode - Floor and cove Cleaning Cycles - 2 hours Brushes - 1 active brush Filtration - Top access 3L EZ-Clean debris basket Features of the Sol™ In-Ground Model - Go on… jump right in. Your pool’s all clear thanks to the Aqua Products Sol robotic pool cleaner. While you sit and sip on lemonade, the small and simple Sol does all the dirty work. Leaves? What leaves… Sol leaves no leaves behind. Dirt? Don’t worry – if you’ve got Sol cruisin’ around your pool dirt doesn’t stand a chance. And fear not, Sol cleans more than just what’s chillin’ on your pool floor. Sol’s scrubbing brush scrubs away the grime found on the floor, walls and waterline — so you can kiss scum, “bye-bye”… With Sol you don’t need to think about cleaning, you just need to decide whether to dive in or CANNONBALL! Features: Cleans in-ground pools < 36 feet 50-foot cable Does the dirty work – cleans and brushes your in-ground pool floor, walls and waterline in just 2.5 hours Scum buster – Scrubs away slippery, stuck-on scum up to the waterline EZ-Clean debris basket – Once cleaning is done simply, pull, spray, and shake the debris away! Good things come in small packages – Lightweight and easy to carry Powerful vacuum suction - Keeps dirt and debris spiraling in the basket instead of settling and slowing suction. Easy Operation - just plug n' play with a single push of a button Specifications: Pool Type - in-ground pools (less than 36' long) Pool Surface - All (vinyl, fiberglass, gunite, pebble, tile) Cleaning Coverage Mode - Floors, walls and waterline Cleaning Cycles - 2.5 hours Brushes - 1 active brush Filtration - Top access 3L EZ-Clean debris basket Frequently asked questions: My pool is tangling in the pool? Oh no! Sounds like you may have a few kinks in your cable, but we can help. Remove your cleaner from the pool then straighten the cable along the ground and let it sit for a few hours while you go enjoy some cold ice cream or a refreshing beverage (you deserve it, tangling cables can be very stressful). Once the cable has “relaxed” all the kinks will be worked out. Now go to the center of the length of your pool and put your cleaner into the pool. Then, gently toss the cable across the pool water so that it’s evenly distributed (in other words, don’t just drop the cable in a lump in one spot). All that’s left is to turn your cleaner on. Now it’s your turn to lay down and relax. The Cleaner Error Indicator flashes during the cleaning cycle. Our robots are so smart they’re actually trying to tell you what the problem is — unfortunately, they only speak in code… Never fear, you can decode their language using your user's manual. We’ve included a handy guide to deciphering their communications in the Troubleshooting section. The Information LED flashes just after start (either pressing the Power or Cycle button for less than 20 seconds). First, try unplugging the floating cable from the control unit, wait a few seconds, and reconnect… Once you’ve done that, remove your cleaner from the pool and re-submerge, (check the “Install and Submerge the Cleaner” section in your user's manual for help here). Now try powering up your cleaner. The cleaner does not or no longer climbs the pool walls? Perhaps your cleaner is just full… check your debris canister and empty it if needed. Might as well give a quick rinse while you’re at it too. If it still won’t climb after a quick clean-up, a more “shocking” solution may be required… literally! The walls of a pool can be slippery — there may be microscopic algae lurking on your pool walls. Brushing the walls and doing a shock chlorination treatment to reduce the organic levels in the pool will help vanquish this uninvited pool guest. But whatever you do, DO NOT leave the cleaner in the pool during this treatment — chlorine is good for sanitizing your pool water, but too much of a good thing can be harmful to your cleaner.

Price: 399.99 USD

Location: Tonawanda, New York

End Time: 2024-08-18T16:09:19.000Z

Shipping Cost: 0 USD